How to Convert FLV to MPEG with Xilisoft FLV to MPEG ConverterConverting FLV (Flash Video) files to MPEG formats can help you play videos on a wider range of devices and editing software. Xilisoft FLV to MPEG Converter is a dedicated tool designed to make that process straightforward while preserving quality and offering useful options like batch conversion, codecs selection, and basic trimming. This guide walks you through every step — from installation and setup to advanced settings and troubleshooting — so you can convert FLV to MPEG quickly and reliably.
What you’ll need
- A Windows PC (Xilisoft’s converters are typically Windows-based; check compatibility for your version).
- Xilisoft FLV to MPEG Converter installed (trial or registered version).
- Source FLV files you want to convert.
- Enough free disk space for output files.
Tip: Back up original files if they’re important — conversion shouldn’t overwrite them unless you choose the same filename/location.
Step 1 — Install and launch the program
- Download Xilisoft FLV to MPEG Converter from Xilisoft’s official website or your licensed installer.
- Run the installer and follow the on-screen prompts (agree to terms, choose install folder, finish).
- Launch the program after installation. The interface typically shows a toolbar, file list area, preview pane, and profile/output settings.
Step 2 — Add FLV files
- Click the “Add File(s)” or “Import” button (usually a plus icon or menu item).
- Select one or multiple FLV files. Xilisoft supports batch conversion, so you can queue many files at once.
- Confirm files appear in the conversion list with details like filename, duration, and size.
Step 3 — Choose an MPEG output profile
- Find the “Profile” or “Output Format” dropdown. Xilisoft includes presets for various MPEG types, such as:
- MPEG-1 (.mpg) — good for VCD compatibility.
- MPEG-2 (.mpg/.vob) — suitable for DVD creation and broadcast standards.
- MPEG-4 (.mp4) — modern, widely compatible container using MPEG-4 Part 10 / H.264 codecs.
- Select the appropriate preset based on where you’ll use the video (DVD, editing, mobile device, etc.).
Bold fact: Choose MPEG-2 for DVD-compatible output and MPEG-4 (MP4) for wide device compatibility.
Step 4 — Adjust output settings (optional)
For better control over quality, file size, and compatibility, tweak these settings:
- Video codec: H.264 for MPEG-4 MP4, MPEG-2 codec for MPG containers.
- Bitrate: higher bitrate improves quality but increases file size. Use 1000–2500 kbps for standard-definition, 4000–8000 kbps for higher quality.
- Resolution: keep the original resolution to avoid scaling artifacts, or select a target resolution (e.g., 720×480 for NTSC DVD).
- Frame rate: match the source (commonly 24/25/29.97 fps) unless you have a specific need to change it.
- Audio settings: codec (MP3, AAC), bitrate (128–192 kbps), sample rate (44.1 or 48 kHz), and channels (stereo/mono).
If unsure, use the preset and only change bitrate to balance quality and size.
Step 5 — Edit or trim (optional)
Xilisoft often includes basic editing tools:
- Trim: cut unwanted segments by setting start/end times.
- Crop: remove black bars or change aspect ratio.
- Merge: join multiple FLV files into a single MPEG output.
- Watermark or subtitle: add text/image overlays or subtitle files if supported.
Make edits before starting conversion. Preview changes using the built-in player.
Step 6 — Choose output folder
Set the destination folder where converted files will be saved. Confirm there’s enough free disk space—MPEG files, especially at higher bitrates, can be large.
Step 7 — Start conversion
Click the “Convert” or “Start” button. The program will process files in the queue. Conversion time depends on:
- File length and resolution.
- Chosen bitrate and codec.
- CPU speed and whether hardware acceleration is enabled.
Most Xilisoft converters show progress bars and estimated remaining time.
Step 8 — Verify the results
After conversion completes:
- Open the output file in a media player (VLC, Windows Media Player with codecs installed, or your target device).
- Check video/audio sync, visual quality, and duration.
- If something looks wrong (sync issues, poor quality), re-open the project, adjust settings (e.g., bitrate, codec, frame rate), and reconvert a short sample first.
Common issues & fixes
- No sound after conversion: ensure the audio codec and sample rate match the player’s supported formats (try MP3 or AAC at 44.⁄48 kHz).
- Stuttering or frame drops: try reducing resolution or choosing a lower bitrate, or enable hardware acceleration if available.
- Files won’t play on a device: use the device-specific preset if available, or convert to MP4 (H.264 + AAC), which is widely supported.
Tips for faster, better conversions
- Convert a short sample clip to test settings before batch-converting many files.
- Use hardware acceleration (Intel Quick Sync, NVIDIA NVENC) if the software and your GPU/CPU support it.
- Keep source aspect ratio to avoid stretching; use letterboxing or pillarboxing when necessary.
- Organize output into folders per project when converting many files.
Alternatives & when to use them
If you need free or cross-platform tools, consider:
- HandBrake — free, open-source, great for MP4/MKV (H.264/H.265) encoding.
- FFmpeg — powerful command-line tool for precise control and batch scripts.
- VLC — can convert single files and stream, but with fewer advanced options.
Use Xilisoft when you prefer a GUI-focused workflow, straightforward presets, and built-in editing features.
Summary
Converting FLV to MPEG with Xilisoft FLV to MPEG Converter is a straightforward process: install the software, add FLV files, choose an MPEG profile, tweak settings if needed, optionally edit, then convert. Test settings on short clips first and adjust bitrate/codecs until you get the balance of quality and file size you want.
Leave a Reply